Skip to Content
Skip to content
PART OF A GROUP
+90 216 593 19 90 Technical Support Document Centre
Motion Control Technologies

We deliver a working motion system, not isolated products

SMB TECHNICS brings controllers, servo drives, motors, HMIs, feedback and connectivity together under one design, validation and integration discipline.

  • 292published product codes
  • 40published product series
  • 10product families
  • 1974Backed by A GROUP industry
A GROUP engineer working in an electronics and mechatronics test environment
ENGINEERING / TEST / PRODUCTION Electronics and mechatronics validation environment A GROUP production environment
Industrial experience
1974
the year A GROUP started manufacturing
Group employees
2,383
in engineering, production and service
Manufacturing and service sites
8
in 2 countries
Covered production area
133,000 m²
across the group’s sites
Published product codes
292
in 10 product families
Integrated Motion Platform

One system language, from control to feedback

The product families are not separate catalogues: together they form the control, drive, motion and connectivity layers of one machine.

01 // CONTROL

Control and operator layer

PLC, controllers, HMI and Panel PC for logic, axis coordination and operator interaction.

Explore control products → 02 // DRIVE

Drive and safety layer

Single and multi-axis servo drives with EtherCAT, CANopen, Modbus RTU and STO where verified on the product record.

Explore servo drives → 03 // MOTION

Motion and feedback layer

Closed-loop torque, speed and position control with servo motors and absolute encoder options.

Explore servo motors → 04 // CONNECT

Connectivity, sensing and protection

Complete the motion chain with cables, connectors, sensors and EMI/power protection.

Explore connectivity →
Engineering Capabilities

From electronics and mechanics to software and integration

Embedded systems, power electronics, mechatronics, structural and industrial design, software development, automation, CNC, project management and product development operate within one R&D framework.

01 / ELECTRONICS

Embedded systems and power electronics

A core capability that treats control electronics and the power stage within the same product-development discipline.

02 / MECHATRONICS

Mechatronics and structural design

An approach that evaluates the electronic, mechanical and industrial-design requirements of motion together.

03 / SOFTWARE

Software development and automation

The integration layer spanning PLC and computer software through industrial device communication.

04 / DELIVERY

Product development and project management

The delivery discipline connecting design decisions with production, assembly, testing and field integration.

  1. 01Design
  2. 02Production
  3. 03Assembly and test
  4. 04Integration

Engineering, test and production environments

Scenes from the electronics production, laboratory and process-control environments within A GROUP.

A GROUP electronics production line
Electronics productionSMT assembly and board production
A GROUP electronics and mechatronics test station
Electronics and mechatronics laboratoryValidation and test stations
A GROUP electronic board production process
Production and process controlElectronic board production process
Engineering Method

Define the motion first, then select the product

The right model comes from evaluating motion profile, feedback, fieldbus, safety and system compatibility together, not from power alone.

Start Selection Quality & R&D
  1. 01

    Requirements

    Load, speed, torque, cycle and environment.

  2. 02

    Compatibility

    Drive, motor, controller, cable and feedback.

  3. 03

    Technical data

    Verified specification, document and product code.

  4. 04

    Application

    Integration and commissioning context.

Open Automation

Open standards in every product

SMB TECHNICS is a member of the EtherCAT Technology Group and CAN in Automation. Product-level compliance and safety marks appear only when the catalogue record carries verified data.

EtherCATSynchronised real-time motion network CANopenOpen device communication with CiA profiles Modbus RTUSimple, widely used serial integration STOSafe Torque Off on verified products
History

A group that has grown by manufacturing since 1974

From metal and plastics manufacturing to electronics and motion control: SMB TECHNICS is built on that experience.

  1. 1974 Akım Metal was established in Istanbul
  2. 1989 Akplas was established in Istanbul
  3. 1993 The first CNC investment was made
  4. 1997 First Automotive Customer
  5. 2004 Aksem was established
  6. 2005 Aluminium Injection activity started
  7. 2011 Central R&D was established
  8. 2012 First Servomotor, CNC and Led production
  9. 2014 YMB was established
  10. 2017 First International Company Curent Metal Srl was established
  11. 2019 The sheet metal forming activities have begun in Romania
  12. 2023 The plastic injection production processes have started in Romania
Manufacturing network

8 sites in 2 countries

From the head office in Tuzla to Gebze, Dilovası, Çerkezköy, Manisa and Targoviste in Romania: see the group’s sites and companies on the map.

See them on the map
  • Akım Metal Since 1974
  • Akplas Since 1989
  • Curent Metal Since 2017
  • Aksem Since 2004
  • YMB Since 2014
1974 Where our industrial experience began

Part of the A GROUP manufacturing ecosystem

SMB TECHNICS shares an industrial group with Akım Metal, Akplas, Aksem, Curent Metal, YMB, DESINIA and Fermada. The group page brings together the companies, production sites and verified milestones.

Explore A GROUP
Bring Motion to Your Life

Let us build the right motion chain for your machine

Tell us about your application, axis count and motion requirements.

Discuss Your Project
Start Product Selection Filter, compare, add to basket