Evaluate controller, servo drive, motor and connectivity in one engineering flow. Build a compatible motion system from real product records.
Every product and figure comes from a real catalogue record
SD24-LP-04-D1-EMAT-SDU3-MP-300-D3-EMAT-SDE3-LV-7020-NC-CSD-LP-04-D1-M
01
SM13-DIN13-150B0MAT-SMR10-JS-D540S30-MT16ST23-200B0MAT-SML06-JS-D48S30-MT16ST17-040B0SM08-DIN13-075B0
02
MAT-LC-C06MAT-LC-DIT-08MAT-PWR-020S1MAT-PC12R-CS-CNC64-EX-32DI-32DO
03
MAT-HMI-R9070-WEMAT-QT-TP-PC10C-Q6-UBT-L1MAT-VO-PC15C-I3-WIN10-L2
04
CNC-ST260CNC-TT550CNC-ST850CNC-YTURN
05
AKM-MCU-HSKA50AKM-SPR-8500AKM-GRP-P2-D100X10AKM-CHK-UBL-8
06
Explore the chain from controller and drive to motor and feedback, with EtherCAT, CANopen and Modbus RTU.
MAT-LC-DIT-08
PLC Digital Input Module — 8 × 24 V DC
MAT-LC-DIT-16
PLC Digital Input Module — 16 × 24 V DC
MAT-LC-AIS-04
PLC Analog Input Module — 4AI × 12-bit
MAT-LC-AQS-04
PLC Analog Output Module — 4AQ × 12-bit
MAT-LC-DQT-16
PLC Digital Output Module — 16 × 24 V DC
MAT-LC-DQT-08
PLC Digital Output Module — 8 × 24 V DC
MAT-LC-DQR-16
PLC Digital Output Module — 16 × Relay
MAT-LC-DQR-08
PLC Digital Output Module — 8 × Relay
MAT-LC-HSC-02
Programmable Logic Controller Module High Speed Counter 2 x Differential/Single-Ended
MAT-LC-HSP-04
Programmable Logic Controller Module High Speed Pulse 4 x Differential/Single-Ended
The industrial switch distributes Ethernet traffic between the controller, the operator panel and the engineering PC. It is part of the architecture, not part of the SMB catalogue.
SD24-LP-04-D1-E
SD24-LP 400 W Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD24-LP-07-D1-E
SD24-LP 750 W Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD24-LP-10-D1-E
SD24-LP 1 kW Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD24-LP-15-D1-E
SD24-LP 1.5 kW Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD-LP-04-D1-E
SD-LP 400 W Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD-LP-07-D1-E
SD-LP 750 W Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD-LP-10-D1-E
SD-LP 1 kW Single/Three-Phase 220 V AC EtherCAT Servo Drive
SD-LP-15-D1-E
SD-LP 1.5 kW Single/Three-Phase 220 V AC EtherCAT Servo Drive
MAT-SDU3-MP-300-D3-E
SDU3 Series 3 kW Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDU3-MP-500-D3-E
SDU3 Series 5 kW Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDU3-MP-750-D3-E
SDU3 Series 7.5 kW Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDE3-LV-7020-NC-E
SDE3 Series 750 W EtherCAT Servo Drive — Open-frame
MAT-SDE3-LV-7020-CS-E
SDE3 Series 750 W EtherCAT Servo Drive — Enclosed
MAT-SDU3-MP-040-D3-E
SDU3 Series 400 W Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDU3-MP-075-D3-E
SDU3 Series 750 W Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDU3-MP-100-D3-E
SDU3 Series 1 kW Three-Phase 380 V AC EtherCAT Servo Drive
MAT-SDU3-MP-150-D3-E
SDU3 Series 1.5 kW Three-Phase 380 V AC EtherCAT Servo Drive
SD-LP-04-D1-C
SD-LP 400 W Single/Three-Phase 220 V AC CANopen Servo Drive
SD-LP-07-D1-C
SD-LP 750 W Single/Three-Phase 220 V AC CANopen Servo Drive
SD-LP-10-D1-C
SD-LP 1 kW Single/Three-Phase 220 V AC CANopen Servo Drive
SD-LP-15-D1-C
SD-LP 1.5 kW Single/Three-Phase 220 V AC CANopen Servo Drive
MAT-SDE2-LV-7010-CS-C
SDE2 Series 400 W CANopen Servo Drive — Enclosed
MAT-SD2E2-LV-7030-CS-C
SD2E2 Series 2 × 1.2 kW Dual-axis CANopen Servo Drive — Enclosed
SMB controllers are programmed in CODESYS: the IEC 61131-3 languages, integrated motion and a single project covering both machine logic and the axes.
PLCopen Motion Control function blocks give every axis the same standard interface, so proven machine code carries over from one project to the next.
SMB servo drives implement the CiA 402 drive profile: the same state machine and the same operating modes over EtherCAT and over CANopen.
Synchronised multi-axis control for contour accuracy at cutting speed.
ExploreA gantry that stays in sync at cutting speed, for fast, clean cuts.
ExploreFast, square, repeatable cutting of panel stacks.
ExploreFast, precise positioning on the backgauge axes.
ExploreContours that hold their speed at the corners, on a noise-proof system.
ExploreHold tension, feed and take-up in sync as line speed changes.
ExploreKeep stations phase-locked electronically instead of by a line shaft.
ExploreHygienic design, accurate dosing and high-cycle reliability.
ExplorePrecision and compactness when the motion must fit inside a moving arm.
ExploreFast, repeatable pick-and-place and loading on X, Y and Z axes.
ExploreQuiet, efficient low-voltage traction running from a battery.
ExploreMillisecond settling on short, frequent, fast moves.
ExploreServo pressing, screwdriving and transfer; every part measured and recorded.
ExploreSynchronised lines that wind and stack thin foil at constant tension.
ExploreRugged, efficient drives for shredders, crushers, sorting and baling lines.
ExploreClosed-loop pressure and position profiles for repeatable part quality.
ExploreDeterministic timing, rugged connectivity and a certified safe state.
ExploreSmooth, precise pointing for cameras, sensors and optical payloads.
ExploreSmall, quiet, smooth motion from a compact low-voltage drive.
ExploreProgrammable stroke profiles, high peak torque and a safe stop.
ExploreWatch the A GROUP test and production facilities and an official demonstration of the SMB TECHNICS system at work.
The official corporate film of an engineering company that designs, manufactures and tests motion control technologies in its own facilities.
Open the official video on YouTubeFrom CAN termination to the electronic gear ratio, from CODESYS task settings to the overvoltage alarm on deceleration; every answer with a checklist and a next step.
Throughout the fair our stand drew close attention from a great many industry representatives from Türkiye and abroad. Our servo motors, drives and motion control systems in particular were examined with keen interest by visitors looking for maximum efficiency and precision on their production lines.
2025-05-29
SMB Technics Discusses the Future of Power Transmission Technologies at WIN EURASIA 2025
The future technologies of power transmission systems are being addressed at WIN EURASIA 2025, held at the Istanbul Expo Center on 29 May 2025. In the Power Transmission Special Area session, one of the fair's notable events, Zafer Çakar and Mert Samast of the SMB Technics R&D team will share insights that will guide the industry.
2025-05-28
We Are at WIN EURASIA 2025 — Hall 8 / C200
We have taken our place at WIN EURASIA 2025, one of the most important meetings in our industry. We look forward to welcoming you at our stand with our innovative products and advanced technology solutions.
Thank You for Attending SPS 2023
We are proud and happy to have successfully completed the SPS Smart Production Solutions Exhibition. We deeply thank our whole team and our valuable visitors for your interest and participation in this process.
Some of the companies running on SMB TECHNICS
Teknorot
Automotive parts
Norm Tooling
Tooling and sheet-metal forming
PM Robotics
Robotic automation
Yılmaz Makina
Machine building
Federal Elektrik
Electrical equipment
Vipatek
Machine technologies
Delta Proje
Hydraulic and pneumatic machinery
Paksan
Machine building
Parsan
Forging and machining
AYD
Automotive components
Teknika
Glass industry moulds
Tezmaksan
Machine tools and robotics
Ne-Ka Elektronik
Electronics
Milteksan
CNC control systems
Van CNC
CNC machine tools
Meyis Otomotiv
Passenger seat components
EtherCAT Technology Group member
CAN in Automation (CiA) member
Define power, torque, speed and fieldbus requirements, then compare compatible drive and motor options.
Start Product Selection Discuss your project with our team →
