General
2| Power range | 400W - 1500W |
|---|---|
| Cooling | DC Fan |
Skip to content
Start Product Selection
Filter, compare, add to basket
Servo Drive
· SD-LP Series
Compare the alternatives
See this series side by side in the selection guide and add to your basket.
SD-LP 400 W Single/Three-Phase 220 V AC EtherCAT Servo Drive
Code: SD-LP-04-D1-E Active
44 technical fields
5 documents
12 series models
SD-LP Series
Open series page
Models in this series
SD-LP-04-D1-M
Power: 400 W
Supply Voltage: 220 VAC
Rated Current: 2.6 Arms (continuous)
SD-LP-07-D1-M
Power: 750 W
Supply Voltage: 220 VAC
Rated Current: 5.1 Arms (continuous)
SD-LP-10-D1-M
Power: 1 kW
Supply Voltage: 220 VAC
Rated Current: 7.3 Arms (continuous)
SD-LP-15-D1-M
Power: 1.5 kW
Supply Voltage: 220 VAC
Rated Current: 8.3 Arms (continuous)
SD-LP-04-D1-C
Power: 400 W
Supply Voltage: 220 VAC
Rated Current: 2.6 Arms (continuous)
SD-LP-07-D1-C
Power: 750 W
Supply Voltage: 220 VAC
Rated Current: 5.1 Arms (continuous)
SD-LP-10-D1-C
Power: 1 kW
Supply Voltage: 220 VAC
Rated Current: 7.3 Arms (continuous)
SD-LP-15-D1-C
Power: 1.5 kW
Supply Voltage: 220 VAC
Rated Current: 8.3 Arms (continuous)
Selected
SD-LP-04-D1-E
Power: 400 W
Supply Voltage: 220 VAC
Rated Current: 2.6 Arms (continuous)
SD-LP-07-D1-E
Power: 750 W
Supply Voltage: 220 VAC
Rated Current: 5.1 Arms (continuous)
SD-LP-10-D1-E
Power: 1 kW
Supply Voltage: 220 VAC
Rated Current: 7.3 Arms (continuous)
SD-LP-15-D1-E
Power: 1.5 kW
Supply Voltage: 220 VAC
Rated Current: 8.3 Arms (continuous)
Electrical
13| Rated power | 400 W |
|---|---|
| Supply voltage | 220 VAC |
| Rated / continuous current | 2.6 Arms (continuous) |
| Peak current | 7.8 Arms (max) |
| Phase | 1PH/3PH |
| Control supply voltage (L1C/L2C) | 200-230 Vac 1Ø, 50/60 Hz |
| Output voltage | 0 - 110 VRms |
| Overload capacity | 300% (5 s) |
| DC input option (P-N) | 265-340 Vdc |
| Input current (3-phase) | 2.2 A |
| Input current (1-phase) | 4.4 A |
| Electrical frequency | 0-250 Hz |
| Braking resistor (internal / external max.) | 40W (60W) |
Control
4| Control modes | Position (External Pulse & Internal), Speed (Analog & Internal), Torque (Analog & Internal) - 6 modes total |
|---|---|
| Position control | Pulse & direction / AB mode; line driver 500 kbps, open collector 250 kbps; electronic gear ratio supported |
| Velocity control | Analogue (±10 V) / internal speed command; range 1:5000 rpm; accuracy < 0.1% |
| Torque control | Analogue (±10 V) / internal torque command; torque limiting supported |
Communication
7| Communication |
EtherCAT
|
|---|---|
| Control profile | CiA 402 / DS402 (velocity, position, torque) |
| EtherCAT ESI vendor ID | 0x0B14 (AKIMMETAL) |
| EtherCAT ESI product code | 0x20200615 |
| Modbus RTU connection | RS-485 / RS-232, CN5 serial port |
| USB connection | CN1, parameter setup and monitoring through the SMB Motion GUI |
| Supported protocol (protocol / closed-loop matrix) |
EtherCAT (native, CiA 402); closed loop supported
|
Feedback
4| Encoder input | 17/21-bit BiSS Absolute and 13-bit Incremental encoders |
|---|---|
| Encoder interface | 17/21-bit BiSS absolute and 13-bit incremental, CN2 20-pin |
| Encoder supply voltage | 4.75 - 5 VDC |
| Max. encoder electrical frequency | >200 kHz |
Inputs & Outputs
2| Digital input | 8 |
|---|---|
| Digital output | 5 |
Mechanical
2| Dimensions (W × H × D) | 175 x 65 x 170 mm |
|---|---|
| Weight | 1.5 kg |
Environmental
1| Operating temperature | 0 ~ +55 °C (operating) |
|---|
Protection
4| Protection class | IP20 (drive; must be panel-mounted) |
|---|---|
| Digital I/O | 8 DI / 5 DO / 2 AI / 1 AO |
| Built-in protections | Overcurrent, over/under voltage, overload, overspeed, IPM and ambient temperature, encoder/fan/brake fault, phase loss, EEPROM fault, emergency stop, WDT (16 alarm codes: AL001-AL016) |
| Single-phase condition at 1500 W | A line reactor with Uk = 4%, 16 Arms is required |
Functions
2| STO | No |
|---|---|
| Key functions |
EtherCAT
|
Certification
3| CE | Yes |
|---|---|
| RoHS | Yes |
| UL | No |
Features:
EtherCAT
Values are taken from the SMB TECHNICS product catalogue, user manuals and verified product records. Please confirm binding figures at the quotation stage.
Order & engineering support
Request Quote
SD-LP-04-D1-E
Confirm variant, compatibility and delivery details against your application.
Where it is used
All industries
Machines this series runs
Electronics Assembly
Millisecond settling on short, frequent, fast moves.
Antenna and Satellite Positioning
Precise azimuth and elevation tracking against wind load.
Solar Trackers
Slow, strong, reliable tracking all day; a safe position in a storm.
Agriculture and Food Processing Machines
Durable motion for seeding, grading and feeding systems.
Recycling Machines
Rugged, efficient drives for shredders, crushers, sorting and baling lines.
Packaging
Keep stations phase-locked electronically instead of by a line shaft.
Robotics
Precision and compactness when the motion must fit inside a moving arm.
Food & Beverage
Hygienic design, accurate dosing and high-cycle reliability.
Need help choosing?
Tell us about your application and we will recommend the right model.
Request Quote